Commercial Lighting Products

CLX Series

    CLX Series - WLS Lighting 

    CLX Series Dimensions - WLS Lighting

    The WLS CLX Series is a LED Area Lamp.  The CLX has a minimum of 60,000 hours to 100,000 hours depending on the ambient temperature of the installation location. It comes in a variety of wattage, color temperatures and your choice of over 6 standard finishes as well as custom finish options.

    5 Year Limited Warranty   |   ETL Listed to U.S. and Canadian Safety Standards   |   Suitable for Wet Locations


    HOUSING – One-piece, die-formed aluminum housing contains factory prewired driver. Wiring access door (with safety lanyard) located underneath.

    OPTICAL UNIT – Clear tempered flat glass lens permanently sealed to weather-tight aluminum optic frame creates an IP65 rated optical unit (includes pressure-stabilizing breather). Optic frame recessed into housing cavity and sealed to the housing with one piece EPDM gasket.

    EXPECTED LIFE – Minimum 60.000 hours to 100.000 hours depending upon the ambient temperature of the installation location.

    LEDS – Select high-brightness LEDs in Cool White (5000K nominal), or Neutral White (4000K nominal) color temperature, 70 CRI (nominal).

    DISTRIBUTION / PERFORMANCE – Types III, FT, 5 and enhanced 5E and FTE. Exceptional uniformity creates bright environment at lower levels. Internal Louver (IL) option available for improved backlight control without sacrificing street side performance for FT distribution.

    ELECTRICAL – Two-stage surge protection (including separate surge protection built into electronic driver) meets Location Category C Low. Available with universal voltage power supply 120-277 VAC (50/60Hz input), and 347-480 VAC. Optional button-type photocells (PCI) are available in 120, 208, 240, 277 or 347 volt (supply voltage must be specified).

    DRIVER – Available in SS (Super Saver) and HO (High Output) drive currents. Components are fully encased in potting material for moisture resistance. Driver complies with FCC standards. Driver and key electronic components can easily be accessed.

    MOUNTING – Use with 5” traditional drilling pattern. An extruded radius 8” arm is shipped standard and compatible with all fixture mounting configurations. The fixture may also be mounted to 3”-5” round poles using the round pole plate adaptor accessory (RPP), which must be ordered separately.

    OPERATING TEMPERATURE – -40°C to +50°C (-40°F to +122°F)

    FINISH – Fixtures are finished with WLS DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years.

    WARRANTY – WLS LED fixtures carry a limited 5-year warranty.

    LISTING – ETL listed to U.S. and Canadian safety standards. Suitable for wet locations.

    CLX Series Light Output - WLS Lighting 

    CLX Series Reflectors - WLS Lighting

    CLX Series Luminaire Chart - WLS Lighting




    1. Photocell must be ordered separately – see Accessories.
    2. SE and FPE not available in CLXL.

    WLS CLX Series-1

    WLS CLX Series-2

    Related Projects

    This is a unique website which will require a more modern browser to work! Please upgrade today!