Commercial Lighting Products

STL Series

    STL Series - WLS Lighting 

    STL Series Dimensions - WLS Lighting

    The WLS STL Series is an LED Area Fixture.

    Limited 5 Year Warranty   |   ETL Listed   |   Suitable for wet locations   |   RoHS Compliant   |   IDA Approved   |   Made in the U.S.A   


    HOUSING – One-piece die-cast aluminum housing contains four gasketed die-cast aluminum optical assemblies. Self-cleaning, vertically oriented structural ribs cast into housing allow for maximum heat dissipation. All hardware is stainless steel. Fixture is IP65 rated.

    EXPECTED LIFE – Minimum 60,000 hours to 100,000 hours depending upon ambient temperature of the installation location.

    LEDS – Range of LEDs between 168 and 302 offered in Cool White (5000K) or Neutral White (4000K) color temperature. 70 CRI (nominal).

    DISTRIBUTION / PERFORMANCE – Available in wide throw (Type 5 and FT) and extended wide throw (Type 5X, AIX, FTX, FTAX) distributions. FT-L, FT-R, FTX-L, FTX-R, FTAX-L and FTAX-R allow for D180° mounting configurations with factory set optics for front row automotive applications.

    ELECTRICAL – Terminal block, in mounting arm, for attachment of incoming primary wiring is supplied. Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277VAC (50/60Hz input) and 347-480VAC. Optional twist-lock photocell receptacle is available. Photocell must be ordered separately. Fixture watts (nominal); Type 5 (SS-240; HO-312), Type 5X (SS-240; HO-312; VHO-491), Type AIX (HO-312; VHO-491), Type FTX (SS-285; HO-366) and Type FTAX (HO-366; VHO-418).

    OPTICAL UNITS – Patented and patent pending angles optical assemblies feature clear tempered optical-grade glass sealed to die-cast aluminum optic assembly to create super-tight IP67 protection (includes pressure stabilizing breather). Lens is mounted perpendicular to angled LEDs to produce widest distribution with highest efficacy possible.

    DRIVER – Available in SS (Super Saver), HO (High Output), VHO (Very High Output) and Super VHO (Very High Output) drive currents (Drive currents are factory programmed). Components are fully encased in potting material for moisture resistance. Driver complies with IEC and FCC standards. Drivers can be easily accessed by removing tethered center access cover.

    OPERATING TEMPERATURE – -40°C to +50°C (-40°F to +122°F)

    FINISH – Fixtures are finished with WLS DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling.

    WARRANTY – WLS STL series carry a limited 5-year warranty.

    LISTING – ETL listed to U.S. and International safety standards. Suitable for wet locations.

    SHIPPING WEIGHT (in carton) – 65 lbs./29.5Kg

    STL Series Light Output - WLS LightingSTL Series Luminaire Chart - WLS Lighting




    1. Photocell must be ordered separately.
    2. Glare Shield adds to fixture EPA. Consult factory.
    3. Fusing must be located in the hand hole of pole.
    4. SVHO drive current available in Type 5X distribution only.

    WLS STL Series-1

    WLS STL Series-2

    Related Projects

    This is a unique website which will require a more modern browser to work! Please upgrade today!