Commercial Lighting Products

WMEL Series

    WMEL Series - WLS Lighting

    WMEL Series Dimensions - WLS Lighting

    WMEL Series Light Output - WLS Lighting

    The WLS WMEL is an LED Wall Mount.  The WMEL is rectangular in shape and is available with 28 or 28 select high-brightness LEDs in Cool White or Neutral White color temperature. Fixtures finish is guaranteed for five full years.

    Limited 5 Year Warranty   |   ETL Listed   |   Suitable for wet locations in downlight position 


    • HOUSING – The aerodynamic aluminum housing is a rectangular shape. All mounting hardware is stainless steel or electro-zinc plated steel. Housing and optical unit are sealed with extruded silicone gasket; supply conductors with molded EPDM bushing.
    • LEDs – Available with 28 or 48 select high-brightness LEDs in Cool White (5300° K nominal) or Neutral White (4200° K nominal) color temperature, 70 CRI (nominal).
    • OPTICAL UNIT – Clear tempered optical-grade flat lens sealed to the aluminum optic housing created an IP67 rated unit. Pressure stabilizing breather allows super-tight protection while preventing cycling from building up internal pressures and vacuums that can stress optical unit seals.
    • OPTICS / DISTRIBUTION – Ultra-high efficiency reflectors provide three distributions. Choose from Wide Throw (WT), Forward Throw (FP) or Wall Wash (WW).
    • DRIVER – Available in 350mA and 450mA drive currents (Drive currents are factory programmed). Components are fully encased in potting material for IP65 moisture resistance. Driver complies with IEC and FCC standards. Driver can be easily accessed and removed.
    • ELECTRICAL – Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Scenario 1,Location Catagory C. Available with universal voltage power supply 120-277VAC (50/60Hz input) or 347-480VAC.
    • OPERATING TEMPERATURE – -40° C to +50° C (-40° F to +122° F)
    • FINISH – Fixtures are finished with WLS DuraGrip® polyester powder coat finishing process. The DuraGrip® finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years. Standard colors include bronze, black, platinum plus, white, satin verde green, graphite, and metallic silver. Custom colors available upon request.
    • OPTIONAL INTEGRAL MOTION SENSOR – Passive infrared motion sensor activates switching of luminaire light levels. High level light is activated when passersby enter the target zone and increased to full-bright in 1-2 seconds. Low light level (30% of maximum drive current) is activated when target zone is absent os motion activity for 5 minutes and is gradually ramped down (10 seconds) to low level. Sensor detection range 110° horizontal x 93° vertical x 10 meters maximum distance.
    • EMERGENCY OPTIONS – Integral emergency battery-back-up options are available. BB option operates in 0° C to 60° C ambient temperature and CWBB operates in -20° C to 60° C ambient temperature. When primary AC power failure occurs, both options operate 10 LEDs for minimum of 90 minutes.
    • WARRANTY – WLS LED fixtures carry a limited 5-year warranty.
    • LISTINGS – ETL listed ANSI/UL 1598. UL8750 and other U.S. and international safety standards. Suitable for wet locations in downlight position.
    • SHIPPING WEIGHT (in carton) – 31 lbs./14Kg

    WMEL Order Information - WLS Lighting


    1. Available with UE Voltage only
    2. Designed with 3″ reduced drilling pattern. For S or D180 mounting configuration only.
    3. Tamper-proof Screwdriver must be ordered separately. (See Accessories Ordering Information.)




    Related Projects

    This is a unique website which will require a more modern browser to work! Please upgrade today!